Product ID:EUTECTRODE 66
MSDS Date:09/18/1986
FSC:3439
NIIN:00N036314
MSDS Number: BQMSD

EUTECTIC CORP

40-40 172ND ST
FLUSHING, NY 11358-9981
US

Emergency Phone: 718-358-4000

Info Phone: 718-358-4000

Cage: 72271

EUTECTIC CORP

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

VAPORS FROM CLEANSING & DEGREASING ACTIVITIES).

RTECS: 9999999ZZ

FLUORIDES, COMPLEX OXIDES OF IRON, MANGANESE,

RTECS: 9999999ZZ

METALS LISTED IN ING SECTION. GASEOUS RXN PRODS MAY

RTECS: 9999999ZZ

NITROGEN OXIDES MAY BE FORMED BY RADIA FROM ARC.SEE

RTECS: 9999999ZZ

P.O. BOX 351040, MIAMI, FL 33135. ALSO FROM AWS IS

RTECS: 9999999ZZ

A SAMPLING STRATEGY GUIDE," WHICH GIVES ADDITIONAL

RTECS: 9999999ZZ

IRON

CAS: 7439-89-6

RTECS: NO4565500

OSHA PEL 10 MG(FE)/M3 TDUST

ACGIH TLV: 5 MG(FE)/M3 RDUST

14542-23-5.

CAS: 7789-75-5

RTECS: EW1760000

OSHA PEL 2.5 MG/M3 AS F

ACGIH TLV: 2.5 MG/M3 AS F

POTASSIUM SILICATE

CAS: 1312-76-1

FERROSILICON

CAS: 8049-17-0

RTECS: LK1400000

SODIUM SILICATE

CAS: 1344-09-8

WELL AS DARK SUBSTANTIAL CLTHG. TRAIN WORKER NOT

RTECS: 9999999ZZ

WORK AND GROUND.

RTECS: 9999999ZZ

PROCESS, PROD, & ELECTRODES USED. OTHER

RTECS: 9999999ZZ

AND GASES TO WHICH WORKERS MAY BE EXPOSED INCL

RTECS: 9999999ZZ

GALVANIZING), NUMBER OF WELDERS & VOL OF WORK AREA,

RTECS: 9999999ZZ

RESPECT TO FUME PLUME, AS WELL AS PRESENCE OF

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: OVEREXPOSURE TO WELDING FUMES
MAY RESULT IN DISCOMFORT SUCH AS DIZZINESS, NAUSEA, OR DRYNESS OR
IRRITATION OF NOSE, THROAT OR EYES. CHRONIC: OVEREXPOSURE MAY LEAD
TO SIDEROSIS (IRON DEPOSITS IN LUNGS) AND MAY AFFECT PULMONARY
FUNCTIONS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EMPLOY FIRST-AID TECHNIQUES RECOMMENDED BY AMERICAN RED
CROSS. INHALATION: REMOVE TO WELL-VENTILATED AREA. CALL FOR MEDICAL
AID. INGESTION: CALL MD IMMEDIATELY . SKIN: FLUSH WITH COPIOUS
AMOUNTS OF WATER . EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES
.

Flash Point:NONFLAMMABLE
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE CONDITIONS
.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . REFER TO ANSI Z49.1 FOR FIRE PREVENTION
DURING USE OF WELDING AND ALLIED PROCEDURES.
Unusual Fire/Explosion Hazard:WELDING ARC AND SPARKS AND BRAZING FLAMES
CAN IGNITE COMBUSTIBLES AND FLAMMABLES.

Spill Release Procedures:NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRABLE FUME
RESPIRATOR OR AIR SUPPLIED RESPIRATOR WHEN WORKING IN CONFINED
SPACE OR WHERE LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE
BELOW RECOMMENDED EXPOSURE LIM IT.
Ventilation:USE ENOUGH GEN VENT & LOC EXHST AT ARC/BOTH, TO KEEP FUMES
& GASES FROM WORKER'S BRTHG ZONE & GEN AREA. TRAIN (SUPDAT)
Protective Gloves:WELDER'S GLOVES.
Eye Protection:WEAR HELMET/USE FACE SHIELD W/ (SUPDAT)
Other Protective Equipment:WEAR HAND, HEAD, & BODY PROT WHICH HELP TO
PVNT INJ FROM RADIA, SPARKS & ELEC SHOCK. SEE ANSI Z49.1.AT MIN,
THIS(SUPDAT)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
VENT: WORKER TO KEEP HIS HEAD OUT OF FUMES.EYE PROT: FILTER
LENS.PROVIDE PROT SCREENS & FLASH GOG, IF NEC, TO SHIELD OTHERS. AS
RULE,START W/SHADE THAT IS TOO DARK TO SEE WELD ZONE. THEN GO TO
NEXT LI GHTER SHADE WHICH GIVES SUFF VIEW OF WELD ZONE. OTHER PROT
EQUIP:INCLS ARM PROT, APRONS, HATS, SHOULDER PROT, AS (ING 6)

HCC:N1
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FUMES & GASES CANNOT BE CLASSIFIED
SIMPLY. COMPOSITION & QTY OF BOTH ARE DEPENDENT UPON METAL BEING
WELDED, (ING 8)

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
WITH FEDERAL, STATE, A ND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.